Oversetter...
28692

F-device PROFIsafe Communication Error (V3 CPU)

ABB · PB610 Panel Builder 600 Programming Software

Hva betyr 28692 ?

A PROFIsafe communication error has occurred for F-device instance <n> with AC500 V3 non-safety CPU PM56xx. This means the safety module cannot correctly exchange telegrams with the safety CPU, leading to a safe state.

Vanlige årsaker

  • Loss of PROFIsafe communication between safety devices and the V3 CPU.
  • Network configuration error or cable fault in the PROFIsafe network.
  • Failure of the PROFIsafe communication stack on either the V3 CPU or the F-device.

Reparasjonssteg & Sjekkliste

Klikk på steg for å spore fremgangen.

  1. 1

    Restart the affected F-device module.

Se alle koder i denne manualen (58)
Verifisert teknisk data. Sist oppdatert: March 2026

Relaterte feilkoder

1Safety Destination Address Not Valid (V2 CPU)10Parameter F_SIL Exceeds Specific Application SIL (V2 CPU)11Safety Watchdog Time Zero (V2 CPU)
Kilde: ABB PB610 Panel Builder 600 Programming Software
Open Manual (Page 459)Søk flere koder i denne manualen