CIP configuration error (_ecCIP_CFG_ERROR)

Hva betyr 8001 ?

This error signifies a CIP (Common Industrial Protocol) configuration issue, where the EtherCAT master received a CIP error code from the drive. The specific problem is detailed by a Profile Code in the Mint WorkBench Error Log, which needs hexadecimal conversion. Improper CIP configuration can lead to communication failures and prevent the drive from operating correctly on the network.

• Incorrect or incompatible CIP configuration downloaded by the EtherCAT Master to the drive.
• Mismatch in object dictionary attributes or instance numbers between the EtherCAT Master's configuration and the drive's firmware.
• Drive attempting to access a non-existent or invalid CIP object.
• Network configuration issues on the CIP layer preventing proper communication (e.g., wrong IP address in configuration).
• Internal drive hardware or firmware issue preventing correct CIP object dictionary initialization.

Klikk på steg for å spore fremgangen.

1. 1

   1. Obtain the specific Profile Code from the Mint WorkBench Error Log or EtherCAT Master's diagnostic interface.

2. 2

   2. Consult the drive's documentation and the CIP specification for the meaning of the specific Profile Code.

3. 3

   3. Verify the CIP configuration file used by the EtherCAT Master matches the drive's supported CIP objects and attributes.

4. 4

   4. Ensure the EtherCAT Master's configuration correctly addresses the drive's CIP objects, especially for device identification (e.g., Vendor ID, Product Code).

5. 5

   5. Perform a factory reset on the drive and then re-download the CIP configuration from the EtherCAT Master.

6. 6

   6. Check for any firmware updates for the drive that resolve known CIP configuration compatibility issues.