No feedback of the laser by external control

What does NoExternMode- Possible mean?

The LSRI_LsrExternEnabled signal, which indicates external control is enabled, is not being generated. This means the laser is not allowing external control, potentially because it's off, resetting, or in manual mode.

1. 1

   Verify that the laser system is switched on and powered.

2. 2

   Check if the laser is currently undergoing a reset sequence.

3. 3

   Confirm the laser is not in manual mode (refer to 'LsrInManual-Mode' resolution).

4. 4

   Verify the wiring and logic for the LSRI_LsrExternEnabled signal input.