Option Board Removed (Slot A/B)

¿Qué significa 39 ?

An option board previously configured for slot A or B has been physically removed from the drive. This means the functionality provided by that specific option board is no longer available. This condition will persist until acknowledged or corrected.

• The option board configured for Slot A or Slot B (as indicated by parameter P5-01 or P5-02) is physically absent or not securely seated.
• Incorrect re-installation of the option board after maintenance, or installation into a different, unconfigured slot.
• Damage to the option board connector pins on the drive or the board itself, preventing proper electrical contact.
• Corrupted drive configuration causing it to expect a specific option board in a slot that is now empty.

Haga clic en los pasos para seguir su progreso.

1. 1

   1. Power down the drive completely, then remove and re-insert the option board into the designated Slot A or Slot B, ensuring it is seated firmly.

2. 2

   2. Verify the option board's model number against the drive's compatibility list in the technical documentation.

3. 3

   3. Confirm that parameter P5-01 (for Slot A) or P5-02 (for Slot B) is correctly set to the specific option board type.

4. 4

   4. Inspect the option board connectors on both the drive and the board for bent pins, debris, or other physical damage.

5. 5

   5. If available, test with a known good, compatible option board in the same slot to determine if the issue is with the board or the drive slot.