[Interface]: duplex mode goes to [Full / Half]

¿Qué significa 10254 ?

The network duplex mode of the inverter's interface has changed, specifically dropping to Half duplex. This can lead to significant performance degradation due to collisions and retransmissions, pointing to a physical layer problem.

• Defective network plug.
• Defective network cable.
• Network connector being pulled or plugged, causing a momentary disruption and duplex mode renegotiation.

Haga clic en los pasos para seguir su progreso.

1. 1

   Ensure that the Ethernet network cable and network connector are not damaged.

2. 2

   Verify that the network connectors are correctly plugged into their respective ports.

3. 3

   Ensure the DHCP server (router) and any network switches are signaling correct operation.