Unsupported Function Code

¿Qué significa #01 ?

The Destination Device (inverter) reported an unsupported function was specified in the Modbus command. This indicates that the Modbus function code sent by the master device is not recognized or implemented by the inverter, leading to command rejection. Such an error prevents the desired operation from being executed by the inverter.

• The Modbus function code specified in the CMND instruction (S+1 lower byte) is not supported by the inverter's firmware.
• An incorrect or deprecated function code was used in the Modbus-RTU communication command for the Destination Device.

Haga clic en los pasos para seguir su progreso.

1. 1

   Verify the Function code (S+1 lower byte) in the CMND instruction operand (e.g., #03 for Read from Holding Register).

2. 2

   Refer to '8-5 Explanation of Each Function Code' in the Multi-function Compact Inverter MX2 Series Type V1 User’s Manual (Cat. No. I585) to confirm supported Modbus function codes for the inverter.