PU stop

¿Qué significa PS ?

This indication means the motor has been stopped either by pressing the STOP/RESET key (when enabled in modes other than PU operation via Pr.75) or by the emergency stop function. It signifies a deliberate or emergency shutdown of the motor's operation.

• External stop signal received from the operator panel (PU).
• Stop command issued from the human-machine interface.
• PU unit disconnected or in a fault state.

Haga clic en los pasos para seguir su progreso.

1. 1

   If stopped by the STOP/RESET key, turn OFF the start signal and press the PU/EXT key to release the stop.

2. 2

   If stopped by an emergency function (indicated by the X92 signal being OFF), turn ON the X92 signal and turn OFF the start signal for release.