Robot was stopped by an interpreter stop

¿Qué significa LsrInTechStop ?

The robot interpreter has been stopped by one of several conditions: activation of the STOP key, an EMERGENCY STOP, an operator safety intervention, an operating mode change, or releasing the enabling switch.

• Robot program execution halted by an interpreter stop command.
• Robot motion suspended due to software command.
• Interpreter error or exception triggered a stop.
• Robot control signal to halt received.
• Manual stop initiated via interpreter interface.

Haga clic en los pasos para seguir su progreso.

1. 1

   Identify the specific cause of the robot stop (e.g., verify EMERGENCY STOP button status, check enabling switch position, confirm operating mode selection).

2. 2

   Clear the stop condition and reset the robot controller.