35 Pressure Sensor 2 Fault
Kone · Elevator Control
¿Qué significa 35 ?
A fault has been detected in Pressure Sensor 2 (specifically, sensor 35), indicating an incorrect reading or circuit failure. This disables all motion functions.
Causas comunes
- Malfunction of Pressure Sensor 2 (sensor 35) (e.g., open circuit, short circuit).
- Damaged wiring or loose connections to Pressure Sensor 35.
- Pressure reading outside of expected operational limits.
Pasos de reparación & Lista de verificación
Haga clic en los pasos para seguir su progreso.
- 1
Inspect wiring and connections of Pressure Sensor 2 (sensor 35) for damage, corrosion, or looseness.
- 2
Measure the supply voltage to Pressure Sensor 2 (sensor 35) at its terminals and compare to specified nominal voltage.
- 3
Measure the output signal from Pressure Sensor 2 (sensor 35) and compare against expected values or technical specifications.
- 4
Check continuity and integrity of the signal cable from Pressure Sensor 2 (sensor 35) to the Kone elevator control unit.
- 5
Verify relevant configuration parameters for Pressure Sensor 2 (sensor 35) in the Kone elevator control unit.