Invalid Prg Cmd

¿Qué significa 15 ?

This error occurs when the CLM01.3-M user program encounters an unrecognized or syntactically incorrect program command. The command is not part of the valid instruction set defined for the CLM01.3-M.

• A program command in the user program is misspelled, incomplete, or does not conform to the correct syntax.
• Attempt to use a program command that is not supported by the CLM01.3-M firmware or model.
• Corrupted user program data in the CLM01.3-M's memory.
• Parameter 84 (Start Task 2 & 3) is enabled with an invalid program command in Task 3.

Haga clic en los pasos para seguir su progreso.

1. 1

   Review the CLM01.3-M user program to identify the invalid program command and compare it against the list of valid commands in Chapter 5 (Programming).

2. 2

   Correct any misspelled or syntactically incorrect commands in the user program.

3. 3

   Ensure that all program commands used are appropriate for the CLM01.3-M model and its firmware version.

4. 4

   If Task 3 is in use, verify that all program commands within Task 3 are valid and that Parameter 84 is correctly configured.

5. 5

   Consider re-transmitting or re-entering the entire program to ensure data integrity and clear any potential memory corruption.