Pos. window for safety rel. operational stop exceeded

¿Qué significa F7030 ?

The motor's actual position has moved outside the defined safety-related operational stop position window. This fault occurs when a safe operational stop function is active, meaning the motor should be held within a very narrow position tolerance, but has drifted or moved excessively.

• Mechanical play or backlash in the system allowing motor drift.
• Insufficient holding torque from the motor or brake.
• Incorrectly configured position window for safe operational stop.
• Faulty position feedback causing the drive to misinterpret its position.
• External forces acting on the load, pushing it out of the window.

Haga clic en los pasos para seguir su progreso.

1. 1

   Check for mechanical play, backlash, or compliance in the drivetrain that allows the axis to drift.

2. 2

   Verify that the motor brake (if used) is holding adequately and that the motor is correctly sized for holding the load.

3. 3

   Review the safety-related operational stop position window parameters (e.g., S-0-0XXX Safe Operating Stop Window) in the IndraDrive.

4. 4

   Inspect the position encoder for proper function and signal integrity.

5. 5

   Ensure there are no external forces or vibrations acting on the load that could push it out of the safety window.