Current Limitation Active

¿Qué significa E260 ?

This warning indicates that the ECODRIVE DKC01.1/DKC11.1 speed controller is entering its limit, meaning the acceleration capacity of the drive has been exceeded. In position control mode, this results in an ever-increasing deviation between command and actual values (lag error).

• Parametrized acceleration value is too high for the drive's capacity or connected load.
• Speed value is set too high in position control mode for the application dynamics.
• Torque limit value in the ECODRIVE DKC01.1/DKC11.1 drive is set too low.
• Excessive load or friction on the mechanical system.

Haga clic en los pasos para seguir su progreso.

1. 1

   In position control mode, reduce the parametrized acceleration value or speed value to allow the ECODRIVE DKC01.1/DKC11.1 drive to follow the position command.

2. 2

   Increase the torque limit value in the drive parameters if necessary and permissible by the application and motor ratings.

3. 3

   Inspect the mechanical system for excessive load, binding, or friction that could be hindering motion.

4. 4

   Verify motor sizing against the application requirements to ensure it can deliver the necessary torque.