Invalid Machining Start Point

¿Qué significa 3505 ?

This MC alarm (specific to Series 30i) indicates that the machining start point defined in the program is invalid. This could be due to a coordinate outside the work envelope, an unreachable point, or a point that interferes with existing geometry, preventing the machining cycle from initiating correctly.

• The computed start point for the cutting path is not achievable.
• Previous operation left the tool in an inaccessible position.
• Axis home position has been lost or incorrectly set.
• Program error in defining the first move of a contour.

Haga clic en los pasos para seguir su progreso.

1. 1

   Modify the machining program to specify a valid and reachable machining start point.

2. 2

   Alternatively, modify the machining program to enable automatic determination of the start point by the control system.