Parameter error

¿Qué significa 21 ?

A parameter has been configured with a value that falls outside its acceptable range. The specific parameter number is typically displayed on the drive's LCP, indicating an invalid setting.

• Parameter value entered manually is outside the acceptable minimum or maximum range (e.g., P1-54 Motor Rated Torque).
• Configuration uploaded from a drive of a different model, size, or firmware version leading to incompatible parameter values.
• Automatic tuning process (e.g., autotune P1-20) attempted to write an invalid value to a parameter.
• Internal corruption of stored parameter settings requiring a factory reset and re-entry.

Haga clic en los pasos para seguir su progreso.

1. 1

   Note the specific parameter number (e.g., P1-54) displayed on the drive's Local Control Panel (LCP) indicating the error.

2. 2

   Access the drive's parameter menu and navigate to the identified parameter (e.g., P1-54).

3. 3

   Refer to the drive's operating manual to find the valid minimum and maximum range for the specific parameter.

4. 4

   Enter a value for the parameter that falls strictly within its acceptable operating range (e.g., 45Nm for P1-54 if max is 50Nm).

5. 5

   Save the parameter changes and monitor the LCP for fault resolution.