Traduciendo...
1332

The PLC program was set in STOP state by the operator.

Bosch Rexroth · Motion Control

¿Qué significa 1332 ?

The PLC program has been intentionally set into the STOP state by an operator using the programming device. This is a PLC error, requiring manual intervention to resume operation.

Causas comunes

  • Operator manually set the PLC program to STOP using the programming device.

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

  1. 1

    Switch the PLC program to 'RUN' state using the programming device monitor.

Ver todos los códigos en este manual (60)
Datos técnicos verificados. Última actualización: March 2026

Fallas relacionadas

1287Error during generating the stack for the IdleTask.1288SERCOS state class 1: Overload cut-off %s-axis.1289SERCOS state class 1: Amplifier overtemperature cut-off %s-axis.
Fuente: Bosch Rexroth Motion Control
Open Manual (Page 82)Buscar más códigos en este manual