Motor Stalled

What does 15 mean?

The motor stall protection has tripped, indicating that the motor has either stopped or is operating at a very low speed while a run command is active and under mechanical load. This typically suggests an excessive mechanical load or a mechanical obstruction preventing motor rotation.

• Motor shaft mechanically locked or jammed.
• Excessive load torque preventing rotation (P0200).
• Incorrect motor parameters configured (P0201).

Click steps to track your progress.

1. 1

   Inspect the motor and its connected load for any mechanical obstructions, binding, or excessive friction.

2. 2

   Verify that the motor is not attempting to accelerate into an immovable or excessively heavy load.