+/-15Volt DC error

What does F8069 mean?

An error has been detected in the internal +/-15VDC power supply of the IndraDrive MPx02. This internal supply is critical for sensitive control electronics, and its failure results in a fatal error, causing the drive to shut down immediately to prevent further damage.

• Internal power supply failure within the IndraDrive MPx02.
• Short circuit on the +/-15VDC internal bus due to faulty components.
• Contamination or aging of internal components leading to a power supply instability.
• Overload on an internal auxiliary supply rail.

Click steps to track your progress.

1. 1

   Completely power cycle the IndraDrive MPx02 by switching off the main supply, waiting for discharge, and then re-applying power.

2. 2

   Check for any external connections or accessories that might be drawing excessive current from the drive's auxiliary supplies (though +/-15VDC is typically internal).

3. 3

   Monitor the drive display for other related diagnostic messages after power-up that might pinpoint a more specific issue.

4. 4

   If the error persists after a power cycle and no external causes are identified, this indicates an internal hardware defect within the IndraDrive MPx02. Contact Indramat service.