Connection error at power supply unit

What does F384 mean?

The DIAX04 SSE-03VRS power supply unit has detected an improper or missing connection, likely on the DC bus bar to connected drive modules. This means the power supply unit cannot establish proper communication or power distribution with the rest of the system, preventing normal operation. The fault protects against incomplete or hazardous setups.

• Loose or incorrect connection of DC bus bars between the DIAX04 SSE-03VRS power supply unit and connected drive modules.
• Missing or damaged connection cable for internal communication (e.g., drive bus, feedback) between the power supply unit and modules.
• Faulty control card or communication interface within the DIAX04 SSE-03VRS power supply unit.
• Incorrect physical addressing or configuration of connected drive modules.
• Contamination or damage to the connector pins on the power supply unit or connected modules.

Click steps to track your progress.

1. 1

   Verify all DC bus bar connections between the DIAX04 SSE-03VRS power supply unit and all connected drive modules are tight and correctly seated.

2. 2

   Check for any missing or damaged communication cables (e.g., fiber optic, ribbon cable) linking the power supply unit to other modules.

3. 3

   Inspect connector pins for bending, corrosion, or contamination on both the power supply unit and connected modules.

4. 4

   Ensure all connected drive modules are correctly addressed or configured according to the system layout.

5. 5

   Perform a power cycle of the entire DIAX04 SSE-03VRS system. If the fault persists, it may indicate a fault with the power supply unit's communication interface.