Inverter %.2s ready

What does 2942 E150 mean?

The RDY (Ready) status of the inverter for the specified axis is HIGH instead of LOW. This is an unexpected state, as the inverter should report a LOW status under certain conditions, such as when not enabled.

• RDY status of the inverter is HIGH instead of LOW.

Click steps to track your progress.

1. 1

   Power cycle the inverter and the NC control to reset their internal states and attempt to re-establish correct communication.

2. 2

   Check the inverter's status indicators and fault history for any specific error messages or abnormal conditions.

3. 3

   Inspect the cabling for the cutout channels and the RDY signal between the inverter and the NC control for proper connection and damage.

4. 4

   Verify the inverter's configuration and parameters to ensure its RDY signal behavior is correctly set and interpreted by the NC control.