Motor %.1s: is not turning

What does 2209 F2B0 mean?

The motor for the displayed axis is not turning when commanded. This indicates a failure in motor activation, power delivery, or mechanical blockage.

• The motor for the displayed axis is not turning.

Click steps to track your progress.

1. 1

   Verify that a valid run command, target position, or speed is being sent to the affected axis by the NC program or manual controls.

2. 2

   Check the motor power cables for continuity, correct connection to the drive and motor terminals, and absence of damage.

3. 3

   Inspect the drive for the specified axis for any fault indicators, error messages, or signs of power loss.

4. 4

   Measure the supply voltage at the drive input and the output voltage/current to the motor when a run command is active to confirm power delivery.

5. 5

   Check for any mechanical binding or blockage in the axis mechanics that physically prevents the motor from rotating.