No response

Was bedeutet E46.1 ?

The safety option failed to synchronize with a subcomponent, indicating a communication or hardware recognition issue. This prevents the safety functions from operating correctly and will inhibit the output stage, rendering the system inoperable.

• Safety option card not fully seated in its slot or incorrectly mounted within the inverter.
• Internal communication bus error between the safety option card and the main inverter CPU.
• Damage to the safety option card itself (e.g., bent pins, internal component failure).
• Firmware incompatibility between the safety option card and the main inverter's firmware version.
• Insufficient power supply from the main inverter to the safety option card due to mainboard fault or power rail issue.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Remove and carefully re-insert the safety option card, ensuring it is fully seated and secured in its designated slot.

2. 2

   Inspect the connector pins on both the safety option card and the inverter's mainboard for damage or bending.

3. 3

   Verify the safety option card's part number matches the required component listed in the inverter's documentation.

4. 4

   Check the inverter's diagnostic menu for any related internal bus errors or status codes.

5. 5

   Measure internal voltage rails (e.g., 5VDC) on the inverter's mainboard if test points are available, to confirm stable power delivery to option slots.