Error in parameter set

Was bedeutet PR0 ?

This error occurs when the operating system software has been updated and requires the storage of the Lenze setting to ensure compatibility. This typically happens after a firmware upgrade.

• Firmware update changed the internal parameter mapping or data structure, making the old parameter set incompatible.
• Failure to save the updated default parameters after a firmware upgrade, causing a mismatch with the new operating system.
• Incomplete firmware update process, resulting in a partially updated operating system that cannot correctly interpret parameters.
• Discrepancy between the loaded application software and the underlying firmware, requiring a parameter re-initialization.
• Corrupted system parameter block during the update, preventing the device from loading any valid configuration.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Immediately save the current parameter set after a firmware update (e.g., using P0-01 = 1) to align with the new OS.

2. 2

   Re-load the latest compatible firmware version, ensuring the entire update process completes without interruption.

3. 3

   Perform a factory reset (e.g., using parameter P0-01 = 0) to re-initialize all parameters to their default values compatible with the new firmware.

4. 4

   Manually re-enter critical application parameters or load a known compatible backup parameter file after the factory reset.

5. 5

   Verify the firmware version displayed on the device (e.g., parameter C0000) matches the expected version for the parameter set.

6. 6

   Cycle power to the device after saving or loading parameters to ensure the changes are fully applied and validated.