Laser is not available and shutter is closed

Was bedeutet NoLaserActive- AndShutter- Closed ?

The laser is not active or available for operation, and its shutter is confirmed to be in the closed position. This can be caused by a missing or undetected activation signal, or an internal error within the laser controller.

• Laser source is offline or unavailable.
• Laser beam path shutter is closed.
• Interlock on laser system indicates it is not ready.
• Laser power supply failure.
• Laser safety interlock engaged, preventing operation.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Verify that all necessary signals for laser activation are generated and detected by the laser system.

2. 2

   Check the laser controller's diagnostic interface or HMI for specific error codes or status messages preventing activation.