Unknown device status, KPP/KSP (axis)

Was bedeutet 26116 ?

The KPP or KSP device for a specific axis is reporting an unknown internal device status. This indicates that the device is in an unidentifiable operational state, which could be due to an internal malfunction or a software anomaly. This condition may prevent proper operation and requires further investigation.

• The KPP/KSP internal diagnostics reported an unrecognized error code.
• A hardware fault within the KPP/KSP has led to an indeterminate internal state.
• Power supply fluctuations causing unstable operation of the KPP/KSP.
• Software corruption on the KPP/KSP controller.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Access the KPP/KSP diagnostic interface via terminal Y2.

2. 2

   Record the reported internal device status code for analysis.

3. 3

   Cycle power to the KPP/KSP module for a minimum of 10 seconds.

4. 4

   Measure the voltage supply at KPP/KSP power terminal Z3.