Platform up limit position

Was bedeutet UP ?

The platform has reached its upper limit position. This is a warning only, indicating the normal end-of-travel for the platform.

• Platform has reached the mechanical or programmed upper travel limit.
• Upper limit switch stuck in active position (false detection).
• Obstruction preventing the platform from fully lowering after reaching the limit.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Verify the current commanded position and operational cycle of the elevator to determine if the platform is expected to be at its upper limit.

2. 2

   Inspect the physical condition, cleanliness, and mechanical actuation of the platform's upper limit switch or sensor.

3. 3

   Check the wiring integrity and connections from the upper limit sensor/switch to the Kone Elevator Control system for damage, corrosion, or looseness.

4. 4

   Verify relevant control parameters within the Kone Elevator Control system related to upper travel limits, position thresholds, and delay timers.

5. 5

   Monitor the real-time status of the upper limit input via the controller diagnostics to confirm accurate signal reception and reset behavior.