35 Pressure Sensor 2 Fault

Was bedeutet 35 ?

A fault has been detected in Pressure Sensor 2 (specifically, sensor 35), indicating an incorrect reading or circuit failure. This disables all motion functions.

• Malfunction of Pressure Sensor 2 (sensor 35) (e.g., open circuit, short circuit).
• Damaged wiring or loose connections to Pressure Sensor 35.
• Pressure reading outside of expected operational limits.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Inspect wiring and connections of Pressure Sensor 2 (sensor 35) for damage, corrosion, or looseness.

2. 2

   Measure the supply voltage to Pressure Sensor 2 (sensor 35) at its terminals and compare to specified nominal voltage.

3. 3

   Measure the output signal from Pressure Sensor 2 (sensor 35) and compare against expected values or technical specifications.

4. 4

   Check continuity and integrity of the signal cable from Pressure Sensor 2 (sensor 35) to the Kone elevator control unit.

5. 5

   Verify relevant configuration parameters for Pressure Sensor 2 (sensor 35) in the Kone elevator control unit.