Incorrect gear range

Was bedeutet 231-E009 ?

This error signals an internal software inconsistency within the Heidenhain TNC CNC Controller, specifically related to the management of gear ranges. It suggests a potential integrity issue with the control software that could lead to incorrect machine operation, unexpected gear changes, or uncontrolled movements.

• Corruption of internal software modules or data structures responsible for gear range selection.
• Incompatible software version or an incorrectly applied patch installed on the TNC controller.
• An undocumented software bug within the installed firmware affecting gear range operations.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Verify the exact software version installed on the Heidenhain TNC CNC Controller against the recommended version specified in the machine documentation.

2. 2

   Check for any recent software updates or patches that might have been applied and could have introduced an incompatibility.

3. 3

   Perform a controlled restart of the TNC controller to clear any temporary software glitches or memory states.

4. 4

   If the error persists, prepare to re-install the correct and verified software version, ensuring all machine parameters are backed up beforehand.

5. 5

   Contact a Heidenhain service agency with the exact software version and the context of the error for deeper analysis and resolution.