Mot. current %.2s not equal 0

Was bedeutet 2941 E140 ?

Motor current was detected as non-zero during a cutout channel test (24-hour test). This indicates that current is still flowing to the motor when it should be fully disconnected or de-energized, posing a potential safety risk.

• Motor current was determined during cutout channel test (24-h test).

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Ensure that during the cutout channel test, no motor current is deliberately being commanded by the control or any residual energy is present.

2. 2

   Check the inverter for the specified axis for any internal faults, leakage current, or sticky contacts when it is commanded to be off.

3. 3

   Inspect the motor power cables for any short circuits or ground faults that could cause current flow even when the inverter is disabled.

4. 4

   Verify that the inverter's output stage completely de-energizes the motor during the cutout channel test, preventing any residual voltage or current.