Control card replacement required

Was bedeutet 2561 ?

An internal issue or critical incompatibility necessitates the replacement of the control card. This fault indicates a problem beyond typical troubleshooting, often related to hardware failure.

• Catastrophic failure of a critical component on the control card (e.g., main processor, memory, power regulator).
• Unrecoverable internal bus communication failure that cannot be resolved by firmware updates or resets.
• Severe damage to the control card due to voltage spikes, short circuits, or physical impact.
• Persistent uncorrectable memory errors indicating a faulty RAM or Flash module.
• Unrecoverable firmware corruption preventing the control card from booting up properly.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Record all existing drive parameters for backup, if accessible via LCP or communication port.

2. 2

   Confirm the exact part number and revision of the control card that needs replacement.

3. 3

   Order a new control card with the correct part number and hardware revision.

4. 4

   Safely remove all power from the drive (L1, L2, L3 mains and control power) before replacing the card.

5. 5

   Install the new control card, then load backed-up parameters and the correct firmware version.

6. 6

   Perform a functional test of the drive and connected motor after card replacement.