Error during generating the stack for the IdleTask.

Was bedeutet 1287 ?

An internal software error occurred during the generation of the stack for the IdleTask. This is a serious system error, indicating a fundamental issue with the system's software components. No error recovery is possible for this fault.

• Internal software error.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Measure the input supply voltage and current at the Bosch Rexroth Motion Control unit's power terminals, comparing against specified nominal values.

2. 2

   Verify the current firmware version of the Bosch Rexroth Motion Control unit and check documentation for any known issues related to this specific firmware version or error code 1287.

3. 3

   Inspect the internal diagnostic logs or error history within the controller's interface for any preceding warnings or errors that might indicate an underlying intermittent issue.

4. 4

   Check the environmental conditions (temperature, humidity, ventilation) around the motion controller to ensure they are within the manufacturer's specified operating range.

5. 5

   Inspect all external cabling, including power, communication, and I/O connections, for loose connections, damage, or proper shielding and grounding.