Velocity exceeded with trend monitoring

Was bedeutet F8135 ?

This fatal error indicates that the motor velocity has exceeded a pre-defined threshold while trend monitoring was active on the IndraDrive MPx02. This suggests an uncontrolled acceleration or overspeed condition that violates safety or operational limits, triggering an immediate shutdown.

• Incorrectly set velocity limit parameter (e.g., S-0-0091 'Maximum velocity') for the application.
• Loss of control due to incorrect gain settings in the velocity controller.
• External mechanical force driving the motor beyond its commanded speed.
• Defective encoder or feedback system providing erroneous velocity readings.
• Commanded velocity exceeding the configured limits or physical capabilities of the motor/load.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Review and verify the velocity limit parameters (e.g., S-0-0091) in the IndraDrive MPx02, ensuring they are appropriate for the application and machine capabilities.

2. 2

   Check the tuning of the velocity controller, especially proportional (Kp) and integral (Ki) gains, for stability.

3. 3

   Inspect the mechanical system for any external forces or loads that could be driving the motor uncontrollably.

4. 4

   Verify the motor encoder for accurate feedback. Check for loose connections, damage, or contamination affecting signal quality.

5. 5

   Monitor the commanded and actual velocity values during operation to identify where and when the limit is exceeded.