E-Stop Discrepancy Error - Input Group 3

Was bedeutet FB ESTOP Bit 2 ?

A discrepancy has been detected between the two channels of input group 3 for the FB ESTOP. This indicates that the redundant E-Stop input signals are not in agreement, suggesting a potential failure of one channel, a wiring issue, or an incorrect switching sequence. This will prevent the E-Stop function from operating safely and halt the machine.

• One channel of the E-Stop device's redundant contacts for Input Group 3 is intermittently failing to close or open.
• Loose terminal screw connection on one of the safety controller input terminals for Input Group 3 (e.g., terminal X3.1).
• Degradation of the E-Stop button's internal spring mechanism, affecting reliable contact switching.
• Voltage drop or noise on the power supply to the E-Stop input circuit, affecting one channel more than the other.
• Safety function block configuration error, setting incorrect input logic for Input Group 3 channels.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Test the E-Stop button for Input Group 3 by pressing and releasing, observing the real-time status of both channels (e.g., LEDs IN_G3_CH1, IN_G3_CH2) on the safety controller.

2. 2

   Measure the voltage potential between each E-Stop input terminal (e.g., X3.1 and X3.2) and the common ground during actuation.

3. 3

   Check the continuity of the wiring for both channels from the E-Stop device back to the safety controller's Input Group 3 terminals.

4. 4

   Confirm the safety controller's parameter settings for Input Group 3 (e.g., P_ESTOP_G3_LOGIC) are correctly configured for the E-Stop device type.

5. 5

   Perform a thorough visual inspection of all components in the E-Stop circuit for Input Group 3, including cables, connectors, and terminal blocks.