PROFInet error code (ecPROFINET_CFG_ERROR)

Was bedeutet 8003 ?

This PROFInet error occurs when the PROFINET master fails to configure the device ID, specifically due to a multicast MAC filter configuration failure. This prevents the drive from being properly identified and communicated with on the PROFINET network, leading to a complete loss of control.

• PROFINET Master attempting to configure a multicast MAC address filter that the drive does not support or cannot implement.
• Incorrect PROFINET device configuration (GSDML file) loaded into the Master, specifying unsupported features.
• Drive's internal PROFINET interface hardware or firmware issue preventing proper MAC address filtering.
• Network switch configuration blocking or interfering with PROFINET multicast traffic required for device identification.
• Outdated PROFINET firmware on the drive causing compatibility issues with the Master's configuration.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   1. Verify the PROFINET Master's configuration (GSDML file) matches the exact model and firmware version of the drive.

2. 2

   2. Check the drive's PROFINET parameters (e.g., P8-01, P8-02) to ensure they are set for PROFINET communication.

3. 3

   3. Review the network switch configuration for any multicast filtering settings that might block PROFINET traffic to the drive.

4. 4

   4. Power cycle the drive and attempt to re-establish PROFINET communication from the Master.

5. 5

   5. Ensure the PROFINET network cabling (e.g., CAT5e/CAT6) is properly connected and undamaged.

6. 6

   6. Update the drive's PROFINET firmware if a newer version is available that addresses MAC filter compatibility issues.