Error applying parameter value (_ecPARAM_ERROR)

Was bedeutet 30008 ?

This error indicates that during a parameter table download or startup, some parameters could not be correctly applied, often due to an issue with the parameter file (.ptx). This commonly occurs when using a parameter file generated with an older firmware version that has incompatible parameters or limits. The drive will not operate correctly with incorrect parameters, potentially leading to unexpected behavior or damage.

• Parameter file (.ptx) is corrupted or incompatible with the current drive firmware version.
• Attempting to write an out-of-range value to a specific parameter (e.g., setting P1-01 beyond its min/max limits).
• Read-only parameter being modified (e.g., attempting to change a drive identification parameter).
• Drive hardware or internal firmware issue preventing successful parameter write operation to non-volatile memory.
• Incorrect communication protocol or settings used by the configuration software during parameter download.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   1. Verify the parameter file (.ptx) version matches the drive's firmware version using the configuration software.

2. 2

   2. Review the specific parameters listed in the drive's error log that failed to apply, checking their valid ranges.

3. 3

   3. Reload a known good, previously saved parameter file that successfully operated with this drive.

4. 4

   4. Perform a firmware update to the drive if a newer, compatible version is available and addresses parameter handling issues.

5. 5

   5. Use the drive's configuration software to read all parameters, export them, and compare with the intended values for discrepancies.