PROFIsafe F_Dest_Add Rules Violated

Was bedeutet 54 ?

The configured PROFIsafe destination address (F_Dest_Add) for the safety PLC is in violation of the defined PROFIsafe configuration rules. This issue prevents the proper establishment of safety communication, as the address does not conform to the protocol's requirements. Such a violation can lead to safety function failures and compromise the entire safety chain.

• The F_Dest_Add value assigned to the safety PLC (F-Host) is outside the permissible range defined by the PROFIsafe standard or specific device manufacturer.
• Duplicate F_Dest_Add values are configured within the same PROFIsafe network, leading to address collisions.
• Incorrect addressing format or data type used when configuring the F_Dest_Add in the engineering software.
• A newly added or replaced safety device is attempting to communicate with an F_Dest_Add that does not match the F-Host's configured address.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Review the PROFIsafe configuration in the engineering software (e.g., TIA Portal, Studio 5000) and verify the F_Dest_Add value assigned to the safety PLC (F-Host) adheres to manufacturer specifications.

2. 2

   Confirm that the F_Dest_Add value is unique across all safety-related components in the PROFIsafe network.

3. 3

   Check the diagnostic buffer of the safety PLC for detailed messages regarding the specific F_Dest_Add rule violation.

4. 4

   Ensure the F-Host's PROFIsafe parameters are correctly aligned with all F-Devices attempting to communicate with it.

5. 5

   Perform an online diagnostic comparison between the project configuration and the actual PLC configuration to identify mismatched F_Dest_Add settings.

6. 6

   Download the corrected PROFIsafe configuration, including the F_Dest_Add, to the safety PLC.