PROFInet error code

What does 8003 mean?

This error is reported when multicast MAC filter configuration fails. It indicates that the PROFInet master has attempted to configure the device ID but has failed on the drive (e.g., MotiFlex e100, MotiFlex e180, MicroFlex e190).

• Failure in configuring the multicast MAC filter on the PROFInet device due to incorrect settings.
• Incorrect PROFInet device ID configuration attempt initiated by the PROFInet master.
• Network configuration conflicts or issues preventing proper PROFInet device setup.
• Incompatibility between the PROFInet master and the drive's PROFInet implementation or firmware.

Click steps to track your progress.

1. 1

   Verify the PROFInet device ID configuration settings on the master controller to ensure they match the drive's requirements.

2. 2

   Check the network configuration to ensure there are no IP address conflicts or issues preventing proper MAC filter setup.

3. 3

   Inspect PROFInet cabling and network components (switches, cables) for proper functionality and damage.

4. 4

   Ensure the drive's firmware supports the PROFInet features and configuration being attempted by the master.